Ledlenser P7R CORE Rechargeable LED Torch
The best selling Ledlenser P7R has been updated to the NEW Ledlenser P7R CORE, which has the same output of 1000 lumens on the highest constant power setting with an additional 1400 lumen 10 seconds boost setting, and features a different look and feel in line with the new CORE series.
The redesigned switch now sits on the neck of the torch and the low profile rubberised button has comfortable and easy operation. The tail end unscrews to install the included Ledlenser 4800 mAh 21700 lithium-ion battery with the positive end towards the head, and the tail cap can then be screwed back on as tight as it will go to ensure a good connection.
Once installed the battery can be charged inside the torch via the magnetic charging point located on the underside. Connect the magnetic end of the included cable to the charging point, and the standard USB at the other end plugs into a suitable USB port or adaptor. The LED indicator built into the button will glow red while charging is in progress and turn green to show charging is complete after approximately 4 hours, 30 minutes for a full charge. The LED indicator also illuminates green, orange or red for 3 seconds when the torch is first turned on to display the remaining battery power.
One new feature is the 15 lumen back up mode, which is triggered when the battery level drops to 25% or below, and will run for a further 1 hour to ensure you are not left in the dark and give you chance to recharge the battery. Other new features included a memory mode that remember the last used setting, a low power warning that blinks when the battery is low and emergency mode that automatically turns the light on in low when the power is cut while the torch is charging.
All these functions can be turned on or off individually by holding the button down with the light turned on for 8 seconds until the button blinks twice. Then release the button and within 15 seconds either press the button once to toggle the memory mode, twice to toggle low power warning, three times to toggle emergency mode or four times to toggle back up mode. The button will blink red twice or green twice to show the function has been turned on or off, depending whether it was on or off previously. The functions can also be reset by holding the button for a further 5 seconds after the initial 8 seconds and the button will blink red four times. Only one function can be changed at a time, so the process needs to be repeated to alter each function.
Smart light technology provides multiple modes of low, mid, high, boost, dim, blink, flashing, position, SOS and strobe that be be customised by the user to suit their needs. Only high mid, low and off are available as default and are cycled through by single presses of the button within 3 seconds of each other. If in any mode for longer than 3 seconds the next press will turn the light off rather than cycling to the next output. The boost output can be activated at any time by double pressing the button and will illuminate for 10 seconds before returning to the previous setting.
The light modes can be customised by holding down the button for 5 seconds while the light is on and the LED in the button will blink once to show customisable light modes has been accessed. You can then cycle through all 9 modes (excluding boost) and once you reach the mode you want to save first, simply press and hold the button for two seconds until the button blinks to indicate the mode has been saved. The light will revert back to the beginning of the 9 modes so you can go through and select the second mode you wish to save. Continue this process until you have as many or little modes in the order you require, and on the last output you wish to save press and hold the button for 4 seconds until the button blinks 3 times to indicate the customisation has been saved and exited.
An advanced focus system combined with multi-core optics allows you to smoothly transition the light from spot to flood by twisting the bezel on the head of the torch. There is also a lock out mode to prevent accidental activation when not in use, which can be activated by holding the button for 5 seconds with the light off until the light blinks four times. To come out of lock out mode, hold the button for 5 seconds until the light blinks four times.
The P7R CORE has improved ingress protection thanks to the flex sealing technology, now offering a rating of IP68 making it fully resistant to solids and fully waterproof when submerged in water up to a depth of 1 metre for 30 minutes, which makes it perfect for everyday use and outdoor activities such as fishing, camping and hiking.
Product Features
Temperature control technology
Customisable modes and functions
Flicker free and focusable beam
Memory mode, emergency mode and back up mode
USB rechargeable with magnetic charging cable
Transportation lock out function to prevent accidental activation
Features low battery warning, battery status indicator & charging indicator
Operational Modes
Low: 15 lumens; 90 hours run-time; 15 m beam range
Mid: 440 lumens; 4 hours run-time; 130 m beam range
High: 1000 lumens; 2 hours run-time; 210 m beam range
Boost: 1400 lumens; 300 m beam range
Tested using the included 4800 mAh 21700 lithium-ion rechargeable battery. These results may vary between torch, battery, environment and individual usage habits.
Technical Details
Type: Hand-held rechargeable torch
Operating Modes: Low / Mid / High / Boost / Dim / Blink / Flashing / Position / SOS / Strobe
Luminous Flux: Up to 1400 lumens
Lamp: 1 x Xtreme cool white LED
Colour Temperature: 6500 K
Colour Rendering Index: 70
Beam Range: Up to 300 m
Batteries Required: 1 x 21700 lithium-ion battery (included)
Charging Time: 4 hours, 30 minutes
Overall Length: 158 mm
Head Diameter: 35 mm
Weight: 202 grams (including battery)
Body Colour: Black
Body Material: Aircraft grade aluminium
Switch Type: Push button switch on the neck of the torch
Impact Resistance: 2 m
Environmental: Dust and waterproof to IP68 standard
Warranty: 2 years standard (7 years with product registration)
Packaging and Contents
Supplied in retail packaging and includes:
Ledlenser P7R CORE LED hand torch x 1
Ledlenser 4800 mAh 21700 lithium-ion battery x 1
Magnetic USB charging cable x 1
Wrist lanyard x 1
Manual x 1
Product tabs
Related products
Coast XP11R Rechargeable Dual Power LED Torch
View details
Coast KL20R LED Key Ring Torch
View details
Ledlenser P7 CORE LED Torch
Ledlenser P7 CORE LED Torch
View details
Coast HP7 XDL LED Torch
Coast HP7 XDL LED Torch
View details
Coast TX22R Rechargeable LED Torch
View details
Coast HP7R Rechargeable LED Torch Kit
View details